Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Calabasas, CA
When a driveway gate stops closing in Calabasas, it’s rarely a simple hinge problem. The communities here run some of the most sophisticated gate systems in Los Angeles County, and they need a shop that understands both the metal and the motor. We’re Ironworks Gate Co., and we handle everything from powder-coated steel swing gates to LiftMaster and FAAC automation and Gate Access Control in Calabasas with equal care. A live person answers our phone at (925) 263-6107, day or night. We know these neighborhoods, we know these HOAs, and we show up ready to fix it right the first time.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Calabasas Homeowners Choose Ironworks Gate Co.
Calabasas gate work comes with a layer of complexity most contractors never see. The Oaks of Calabasas and Calabasas Park Estates run proprietary access control boards paired with high-end operators, and the HOA architectural review process means every repair has to match approved finishes and specs. We’ve been doing this work long enough to know that a gate repair in Calabasas isn’t just about the broken part. It’s about the compliance paperwork, the brand-specific programming, and the finish matching the four neighboring gates on the same street. Our technicians are background-checked and uniformed, and they carry certification across nine major opener brands including DoorKing, Elite, and LiftMaster. When we leave, the gate works and the HOA has nothing to complain about. That’s the standard.
Gate Repair Services We Offer in Calabasas
Gate Repair
A sagging swing gate or a slide gate grinding on its track usually means worn rollers, bent hinges, or a motor fighting alignment. We diagnose the actual cause and fix the mechanical problem, not just the symptom. Learn more about our Gate Repair in Calabasas.
Gate Installation
New gates in Calabasas have to clear HOA review, match the neighborhood finish, and handle years of Santa Ana wind. We measure, spec, fabricate, and install with the paperwork handled properly. Learn more about our Gate Installation in Calabasas.
Gate Motor & Opener
Most Calabasas failures we see are in the operator: bad limit switches, failed control boards, or motors burned out from fighting misaligned hinges. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Learn more about our Gate Motor & Opener in Calabasas.
Gate Access Control
Keypads, video intercoms, license-plate readers, and phone-based entry systems all need programming that’s brand-specific and security-conscious. We integrate new hardware with existing automation without leaving the gate vulnerable.
Gate Parts & Welding
Ornamental iron and steel gates crack at the welds over time, especially where the operator arm attaches, so we offer Calabasas Gate Parts & Welding to fix it right. Our welding repairs are ground smooth, primed, and powder-coated to match, so the repair doesn’t look like a patch.
Neighborhoods We Serve in Calabasas
We work throughout Calabasas and our West Hills service area, and arrive at most repair calls within a few hours, not days.
- The Oaks of Calabasas
- Calabasas Park Estates
- Mountain View Estates
- Calabasas Hills
- Malibu Canyon corridor
Why Calabasas’s Climate & Housing Affect Gate Repair
Calabasas sits right where the Las Virgenes and Malibu Creek canyon corridors open up, and the Santa Ana winds that funnel through here hit gates with real force. We regularly see swing-gate articulating arms bent off their mounting brackets and slide-gate tracks packed with wind-driven debris in the 91302 and 91372 zip codes. The intense inland sun does its own damage too. Dark powder-coated gates, which most Calabasas HOAs require, chalk and delaminate faster here than almost anywhere else in the county. That same UV exposure bakes the plastic gears and wire insulation inside operators, shortening the life of motors that would last a decade in a coastal climate. The housing stock compounds the issue. These are 1980s to 2000s Mediterranean and Spanish Colonial homes with custom ornamental gates, and the operators installed then are now hitting end-of-life together. Many of those systems are proprietary, which means a generic handyman with a multimeter isn’t going to sort out a BFT control board or a DoorKing limit switch issue. It takes brand-specific knowledge and the right parts on the truck.
Pricing for Gate Repair in Calabasas
Most gate repairs in Calabasas run between $225 and $650 depending on the failure. A hinge or roller replacement typically falls in the $180 to $340 range. A limit switch or safety sensor fix is usually $225 to $400. Operator replacement, where the motor or control board has failed, lands between $750 and $1,900 installed depending on brand and horsepower. Every job gets an upfront written price before any work begins. No surprises on the bill, and the 90-Day Done Right Promise covers the repair in writing. We also offer a $89 seasonal tune-up and $50 off any repair over $250.
Service Area - Cities Near Calabasas
We serve Calabasas and the surrounding communities, including West Hills, Topanga, Canoga Park, and Winnetka. If your property sits on the edge of Calabasas and you’re not sure which area we cover, call us and we’ll confirm it right away.
Serving Calabasas, CA - Our Local Coverage Area
We’re based in the Calabasas area and our Topanga service area, and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Calabasas
Most Calabasas gate repairs run between $225 and $650, with hinge and roller work typically in the $180 to $340 range and operator replacement between $750 and $1,900. The price depends on your operator brand, the condition of the gate itself, and whether HOA-approved finishes are required. Call (925) 263-6107 for an exact quote. Estimates are free, and the price is settled before any work begins.
In most cases, yes. We keep repair trucks routed through the Calabasas area throughout the week, and response time is typically a few hours for urgent failures like a gate stuck open or closed. A live person answers at (925) 263-6107 and can confirm your window right then.
Yes. Calabasas has a dense concentration of gated communities with strict architectural review, and we work within those rules daily. We match approved finishes, use compatible hardware, and document work in the format HOAs typically request. If your community requires pre-approval, we’ll help you gather what’s needed before the repair starts.
We service nine leading brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Calabasas homes frequently run LiftMaster and Elite swing operators, and we stock common parts for those systems on our trucks. If we don’t have the part, we order it and return quickly.
We see this all the time. Wind-damaged gates in Calabasas usually involve bent operator arms, posts pulled out of alignment, or track channels packed with debris. We straighten or replace the damaged components, realign the gate, and test the safety edges and limits so the next wind event doesn’t cause the same failure. Call (925) 263-6107 to schedule an inspection.
Contact Ironworks Gate Co. in Calabasas
If your gate is failing, stuck, or making noise it shouldn’t, call (925) 263-6107. A live person picks up, every time. We’ll ask what’s happening, give you a straight answer, and get a technician to your Calabasas home fast. Estimates are free, the price is agreed before work starts, and every repair carries our 90-Day Done Right Promise in writing. Victor Salinas leads our team, and he holds every technician to the K.E.Y.S. standard: Krafted right, Every time, Your home first, Standing behind it. That’s the deal, and we’ve been keeping it for over 42 years.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Calabasas and the surrounding Los Angeles area for over 42 years.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Calabasas Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and put a surge protector on the line so hopefully it does not happen again."
- Layla Haddad"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."
- Jamal Dawson"The hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a new gate, which two other companies had pushed for."
- Megan Whitaker