Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Encino
Gate installation in Encino runs $2,800 to $14,000 for most homes, with custom ornamental estate gates on the hillside starting around $9,000 and standard driveway swing gates in the flats landing between $3,500 and $6,500. We install gates that hold up to 105°F Valley summers, steep Encino Hills driveways, and LAFD fire zone requirements, and we quote the full price before any metal gets cut. If you live off Ventura Blvd or up in Encino Hills and need a gate that opens smoothly for the next twenty years, call (925) 263-6107 and we’ll come measure the driveway, talk through the options, and hand you a written estimate the same visit.
Our Gate Installation team works exclusively on driveway and estate gates. We do not do fences, patios, or weekend side jobs. Every gate we hang in Encino is welded, set, and wired by background-checked technicians who have been building gates for decades, not a rotating crew learning on your property.
Why Ironworks Gate Co. Is Encino’s Preferred Gate Installation Company
We have been building and performing Gate Repair - Encino for over 42 years, and the work we do in Encino keeps us honest. The hillside estates north of Ventura Blvd demand a level of precision that flat residential work never asks for. You cannot hang a 600-pound ornamental iron gate on a 12% grade, wire a FAAC operator to an existing intercom, and set the whole assembly so it clears the slope without binding, unless you have done it hundreds of times. Our crews have, and Encino homeowners call us back when they add a pedestrian gate or upgrade to a camera entry system.
Victor Salinas, who runs our installation crews, is the person you will see at the estimate and the person accountable if anything is not right. That is not a line. It is how we operate. Encino customers who call us expecting a salesperson and a subcontractor are usually surprised when the same uniformed technician who measured the driveway comes back to weld the hinge posts and program the operator.
We answer the phone with a live person, 24 hours a day, 7 days a week. When a gate fails in Encino on a Sunday evening, you reach a dispatcher who knows our Encino schedule, not a voicemail that might get returned Tuesday. And every installation we complete carries our 90-Day Done Right Promise, written and signed, no paperwork and no arguing. If the gate is not right, we return and make it right.
Our Gate Installation Services in Encino
Swing Gate Installation
Most Encino Hills estates have swing gates, and most of them are ornamental wrought iron built with the house decades ago. We install new swing gates with the slope in mind from the first measurement. On steep Encino driveways, that means a deeper footing on the hinge post, a higher-torque operator like FAAC or LiftMaster, and dampers set to handle the grade so the gate does not sag three months after installation. A standard double swing gate on an Encino flat lot runs $4,200 to $8,500 installed, motors included.
Security Gate Installation
Encino sits against the Santa Monica Mountains, and properties in the foothill zones answer to LAFD fire codes that flatland houses in the Valley never face. If your property requires a Knox-Box or rapid-entry provision, we integrate it into the gate system during installation, not as a retrofit after a fire inspector tags you. We also build security gates with Encino Gate Access Control, keypad entry, intercom tie-in, and camera integration so a delivery arrives without you walking down a 60-foot driveway.
Double Gate Installation
Double gates are the most common request in Encino’s newer estates and rebuilt ranch properties where a wide driveway needs a full 20 to 24 feet of clearance. The challenge in Encino is uneven hinge loading when the driveway slopes across its width, which burns out standard operators in under three years. We spec high-torque operators and set each leaf independently so the gate opens square and closes without slamming. Expect $6,000 to $14,000 for a custom double ornamental gate, depending on ironwork and automation.
Sliding Gate Installation
Sliding gates fit Encino driveways where a swing gate would arc into landscaping, a retaining wall, or a parked car. On older Encino lots along Burbank Blvd and the flats south of Ventura, we regularly install slide gates on driveways under 30 feet deep. A steel sliding gate with rack and pinion and a safety edge system runs $5,500 to $11,500 in Encino, installed and programmed.
Pedestrian Gate Installation
We install matching pedestrian gates alongside driveway gates so you do not open a 600-pound automated gate every time you walk to the mailbox. In Encino’s hillside estates, pedestrian gates often need their own keypad or intercom station, and we tie both into the same control system. A welded steel pedestrian gate with a lock and closer runs $1,800 to $4,200.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Encino
We are factory-trained and equipped on nine gate-automation brands, and the ones we install most often on Encino estate gates are FAAC, LiftMaster, Viking, and Elite. Why those four for this part of the Valley? FAAC and LiftMaster make high-torque hydraulic and electromechanical operators that hold up to steep driveways without burning out, and Viking and Elite keypad and intercom systems integrate cleanly with existing home entry panels in older Encino homes. We keep Gate Parts & Welding - Encino stocked with common control boards, photo eyes, and safety edges so a failed board does not turn into a three-week parts wait.
Common Gate Installation Problems We See in Encino Homes
- Thermal warping of fresh swing gate frames. Encino’s summer temps regularly top 105°F, and a newly welded steel gate that was not set with expansion allowance will bind against its own frame within the first season. We weld with thermal movement accounted for from the start.
- Steep driveway torque killing undersized operators. A 12% grade in Encino Hills places far more load on the motor than the manufacturer’s flat-ground rating. Standard operators fail early on these slopes; we spec higher-torque models and set the dampers accordingly.
- Santa Ana wind damage to slide gates. October and November winds funnel through the Valley and slam lighter slide gates against the rack and pinion, knocking alignment out and damaging safety photocell wiring. We anchor slide gates and harden the wiring so the first wind event does not take out the entrapment sensors.
- LAFD fire zone compliance missed by out-of-area installers. Many Encino Hills properties require Knox-Box or rapid-entry provisions integrated into the gate itself. We build that into every installation from day one, not as a surprise after the inspector visits.
Pricing for Gate Installation in Encino, CA
Here is what Encino homeowners should expect, before we talk about your specific driveway:
- Standard single swing gate, steel frame with pickets, operator included: $3,500 to $6,500
- Double swing gate, custom ornamental iron, high-torque operator: $6,000 to $14,000
- Sliding gate, steel, rack and pinion, safety edges: $5,500 to $11,500
- Pedestrian gate with lock and closer: $1,800 to $4,200
- Custom ornamental estate gate, fabricated and finished, with automation and intercom tie-in: $9,000 to $20,000+
Your estimate is written and itemized, and the price is agreed before any work starts. No surprise line items on the invoice. We will also give you a free second opinion on any written estimate from another gate company so you can compare ironwork specs and operator models side by side. Call (925) 263-6107 for a free measure and written quote.
We Also Serve Cities Near Encino
Our crews cover the surrounding Valley communities weekly. If you live in Encino or nearby, we serve Tarzana, Reseda, Sherman Oaks, and Winnetka with the same crews and the same 90-Day Done Right Promise on every gate we install.
Serving Encino, CA - Our Local Coverage Area
We’re based in the Encino area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Encino
Yes, in most cases. Encino Hills falls within City of Los Angeles fire zone adjacency rules, which require LAFD rapid-entry provisions on many gated hillside properties. We integrate the Knox-Box or equivalent into the gate frame during installation so the fire department can access your property without cutting the gate. Call (925) 263-6107 and we will confirm your specific address against current LAFD requirements.
Because the post footing was not deep enough for the slope. On a 12% grade, the downhill hinge post carries most of the gate’s weight, and a standard 36-inch footing will shift within months. We pour deeper footings and use larger post stock on sloped Encino driveways from the first day. Call (925) 263-6107 and we will inspect the footing, not just tighten a hinge and call it done.
We weld the frame with thermal expansion allowance built in, meaning the gate has room to move through heat cycles without binding against its own frame or the posts. We also set the hinges with clearance that anticipates metal movement. If your gate already binds in summer and frees up in winter, it was built without that allowance. Call (925) 263-6107 for a straight answer on whether it is repairable or needs rehanging.
Yes, as long as there is enough side clearance for the gate to stack, and we build the rail and track to follow the natural grade rather than fighting it. Most narrow sloping Encino driveways work fine with a slide gate. We will confirm the measurements at the free estimate. Call (925) 263-6107 to schedule the measure.
Yes. Most intercom and camera systems in Encino homes, whether older hardwired units or newer IP-based door stations, can tie into gate operators from FAAC, LiftMaster, Viking, Elite, and the other brands we service. We matched a FAAC operator to an existing intercom on an Encino Hills property off Ventura Blvd, and the system has run clean for three years without a callback. Call (925) 263-6107 and we will check compatibility before you spend a dollar.
Contact Ironworks Gate Co. in Encino
Gate installation in Encino is not a handyman job. The heat, the slopes, the fire codes, and the weight of ornamental iron all demand a specialist who has done this work for decades. We have. Call (925) 263-6107 for a free estimate. A live person answers, 24 hours a day, 7 days a week. We will come to your home in Encino, measure the driveway, spec the right gate and operator for the grade, and hand you a written quote on the spot. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Encino since 1984.