Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Tarzana
If your Tarzana gate is sagging on its hinges, leaning at the post, or a weld has finally let go after thirty years of Valley heat, we can fix it. Ironworks Gate Co. handles gate parts and welding for homes across Tarzana, from the ranch tracts south of Ventura Blvd to the hillside estates climbing toward the Santa Monica Mountains. Most hinge replacements, post resets, and weld repairs we do in Tarzana are completed in a single visit, with the price settled before we touch a bolt. Call (925) 263-6107 and a live person answers, any hour, any day.
Why Ironworks Gate Co. Is Tarzana’s Preferred Gate Parts & Welding Company
We’ve worked on enough Tarzana gates to know what the Valley does to them. The heat north of Ventura Blvd is a different beast than what you get in Encino or Sherman Oaks. It cooks control boards, dries out wiring insulation, and puts real thermal stress on every weld and hinge pin. Our Gate Parts & Welding team carries the parts and the welding rig to handle that on the first trip, not the third.
Victor Salinas leads our crew, and he’s spent over four decades doing this work the slow, correct way. No shortcuts on a weld. No reusing a hinge post that should be replaced. When a Tarzana homeowner calls about a gate that won’t close or a post that’s pulling loose, they get a straight answer and a written price before any work begins. Every job, including parts replacement and welding, is covered by our 90-Day Done Right Promise. If it isn’t right, we come back and make it right. No paperwork, no arguing.
We service Gate Parts & Welding in Tarzana with background-checked, uniformed technicians who follow the same code on their 400th job as their first: Krafted right, Every time, Your home first, Standing behind it. We answer the phone 24/7. Not a voicemail tree. A person.
Our Gate Parts & Welding Services in Tarzana
Hinge Replacement
On Tarzana hillside properties north of Ventura Blvd, gravity never rests. Swing gates that sit on a grade pull constantly against their hinges. After enough years, the hinge welds fatigue, the barrels egg out, and the gate starts dragging on the driveway. We replace hinges with heavier-duty units rated for the gate’s actual weight, not the weight the original builder assumed. A typical hinge replacement in Tarzana runs $180-$420 per pair depending on gate size and whether the existing welds need grinding out.
Post Replacement
When a gate post leans, the problem is usually below ground. In Tarzana’s hillside neighborhoods, the native soil is a mix of decomposed granite and clay that shifts with winter rains and summer shrink-swell cycles. A post set shallow or in undersized concrete will eventually move. We dig out the old footing, set a new post in properly sized concrete after a full cure-relevant backfill, and re-hang the gate square. Post replacement in Tarzana typically runs $450-$950 including the new post, concrete, and re-hanging the gate. If the old post was in a poured-in-place foundation, add $150-$300 for core drilling.
Rail Repair
Slide gates on Tarzana properties deal with two local enemies: Santa Ana winds and debris. The winds funnel through the foothill gaps and slam the gate against its stops, bending rail sections and loosening track anchors. During fall months, leaves and chaparral litter jam the rollers and burn out opener motors. We straighten or replace bent rail sections, re-anchor the track, and align rollers so the gate runs true. Rail repair in Tarzana typically runs $250-$600 depending on how much rail needs replacing and whether the track concrete is intact.
Custom Welding
Some of the nicest gates in Tarzana were built in the 1980s and 90s, and the ornamental steel work was often beautiful. When a rosette snaps, a scroll cracks, or a corner joint separates, you need a welder who understands both the metal and the heat-affected zone. We weld on-site, and we match the existing finish as closely as the material allows. Custom welding repairs in Tarzana run $150-$850 depending on the extent of the damage and whether the gate needs to come off its hinges. We can also fabricate replacement sections when the original piece is too far gone to weld.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Tarzana
Tarzana’s hillside gates from the 1980s and 90s lean heavily on DoorKing, Viking, and LiftMaster operators. We’re trained and equipped on those and six other major gate-automation brands, so when your operator’s control board fails mid-cycle in July, we diagnose it correctly the first time. We stock common replacement boards, capacitors, and limit switches for the brands we see most around Tarzana, which shortens your downtime and gets the gate closing again. For heavy wrought-iron swing gates on steep driveways, we often recommend a high-torque LiftMaster unit with anti-drift calibration. It’s a square deal: the right part, the right fix, no surprises on the bill.
Common Gate Parts & Welding Problems We See in Tarzana Homes
- Hinge post weld fractures on hillside driveways. Gates north of Ventura Blvd sit on real grades, and gravity works on them 24/7. We regularly see hinge welds cracked clean through from years of drift stress.
- Heat-killed capacitors and control boards in aging openers. Tarzana summer highs above 105°F bake the internals of 1980s and 90s DoorKing and Viking operators. A capacitor that was rated for 85°C degrades fast when the enclosure sits in direct Valley sun.
- Santa Ana wind damage to aluminum frames and welds. The foothill corridors catch those winds hard. Lighter aluminum gate frames twist, hinge welds snap, and slide gates end up jamming on bent track.
- Sliding gate rollers seized from debris and grit. Long driveways on hillside lots collect chaparral, eucalyptus bark, and dust. Rollers seize, the gate binds, and the opener burns out trying to force it. Rail repair usually includes freeing or replacing the rollers.
Pricing for Gate Parts & Welding in Tarzana, CA
You should know the number before we start. Here’s what we typically see across Tarzana:
- Hinge replacement: $180-$420 per pair, including cutting out the old welds.
- Post replacement: $450-$950 including new concrete and re-hanging. Core drilling adds $150-$300.
- Rail repair: $250-$600 depending on rail length and track condition.
- Custom welding repair: $150-$850 based on damage extent and whether the gate comes off the hinges.
- Solar opener retrofit for long driveways without mains: $1,200-$2,800 depending on gate weight and panel placement.
These are honest Tarzana ranges, not teaser numbers. The exact price is quoted and agreed before any work begins. We also offer a Free Second Opinion on any written estimate you’ve received from another company. And for seniors and veterans, there’s a standing 5% discount on every job. A 40-year-old gate can close like the day it was hung, and you’ll know the cost before we start. Call (925) 263-6107 for a free estimate.
We Also Serve Cities Near Tarzana
While we spend most of our days on Tarzana driveways, our crews regularly work in Encino, Reseda, Winnetka, and Canoga Park. Same standard of work, same written guarantee.
Serving Tarzana, CA - Our Local Coverage Area
We’re based in the Tarzana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Tarzana
Gravity. On a steep driveway north of Ventura Blvd, a swing gate constantly pulls against its hinges, so any small weld defect grows into a full fracture over years of daily cycles. We set posts deeper in concrete and spec heavier hinges for grade-mounted gates. Call (925) 263-6107 to have us inspect your hillside gate before it fails completely.
Yes, but only with a correctly sized panel array, deep-cycle battery bank, and a high-torque operator. We’ve installed solar retrofits on long Tarzana driveways where running conduit to the gate would cost more than the opener. A properly designed solar system for a heavy wrought-iron gate runs $1,200-$2,800. Get a free site assessment by calling (925) 263-6107.
Any operator repair or replacement must include functioning entrapment protection: photo eyes, contact edges, and proper force settings for the gate’s weight. We align and test every safety device to UL 325 before we leave a Tarzana property, because it’s about safety, not just making the gate open. We’ll walk you through what we verify and why.
It shortens their life significantly. The San Fernando Valley’s sustained 105°F-plus summers push electrolytic capacitors past their thermal ratings, which causes the control board to fail mid-cycle. We see it most on 1980s and 90s Viking and DoorKing units. If your gate stops halfway through its travel on a hot afternoon, that’s likely the cause. Call (925) 263-6107 for a diagnostic visit.
Yes. The biggest stress on a slide gate on a grade is gravity pulling the gate downhill against the rollers and track. We add bracing or weld-on adjusters where needed so the rail doesn’t deflect. A rail repair that skips that reinforcement will fail again. We stand behind it, in writing, with our 90-Day Done Right Promise.
On a Steep Tarzana Driveway, the Gate Has to Be Right
We rebuilt both sagging wrought-iron swing gate panels on a winding driveway in the hills north of Ventura Blvd after a Viking operator failed and let the gates drift on their own weight. The hinge posts had fractured at the base welds, and the gate corners had opened up. We re-welded the frame corners, set new hinge posts in deeper concrete, swapped in a high-torque LiftMaster with anti-drift calibration, and aligned new safety photocells to pass UL 325 entrapment checks before we left the property. That’s the work Tarzana’s hillside gates demand, and it’s the work we do.
If your gate is sagging, leaning, or just won’t stay put, call Ironworks Gate Co. at (925) 263-6107. A live person answers. We’ll give you a written price before any work starts, and we’ll back the finished job with our 90-Day Done Right Promise. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Tarzana with gate parts and welding since 1984.