Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Calabasas
Gate installation in Calabasas runs roughly $2,800 to $9,500 for a standard motorized driveway gate, with pedestrian gates starting near $1,400 and full double-gate security systems with automation landing between $7,000 and $15,000 depending on operator brand, gate length, and HOA compliance requirements. We schedule most Calabasas installations within 5 to 10 business days, and we quote the full job in writing before any work starts. If you live in The Oaks, Calabasas Park Estates, Mountain View Estates, or anywhere in the 91302 and 91372 zip codes, call (925) 263-6107 and a live person will answer, day or night.
Why Ironworks Gate Co. Is Calabasas’s Preferred Gate Installation Company
We have done enough gate work in Calabasas to know that the HOA architectural review layer changes everything. A gate that would sail through in Woodland Hills gets rejected here for a powder-coat shade that is off by a single finish code. We pull the CC&R requirements before we order steel, so the gate you approve is the gate the HOA approves. Victor Salinas runs our crews with a simple rule: no surprises, written down, before the first hole is dug.
Our Calabasas customers tend to stay in their homes for decades. They remember the contractor who underbuilt the gate and disappeared. We have been serving local communities for over 42 years, since 1984, and we plan to be here for another forty. That means we stand behind every job with a written 90-Day Done Right Promise, and we answer our own phone, 24 hours a day, 7 days a week. Not a voicemail. Not an answering service. A person.
Most Calabasas gate installations are completed in a single visit. Our technicians are background-checked and uniformed, and they treat your driveway the way they would treat their own mother’s.
Our Gate Installation Services in Calabasas
We are a dedicated gate specialist, not a general handyman service. That focus matters here because Calabasas gates are not builder-grade. The dominant housing stock in this city is 1980s to 2000s custom and semi-custom Mediterranean and Spanish Colonial Revival homes, almost universally set behind ornamental powder-coated steel or wrought-iron driveway gates. These systems need real welding craft and real automation programming, often on the same job.
Driveway Gate Installation
A driveway gate in Calabasas is often the first thing a visitor sees, and the HOA knows it. We install steel, wrought-iron, and aluminum driveway gates sized correctly for the opening, hung on posts poured deep enough to hold a 20-foot double gate on a wind-exposed uphill driveway. Every job includes a written materials list and finish code for HOA submittal.
Pedestrian Gate Installation
Pedestrian gates in Calabasas typically serve side yards, pool enclosures, and separate entries off Calabasas Road or Mulholland Highway. These gates look simple but they still need proper footings, a magnetic or mechanical latch, and often a keypad or intercom tie-in that matches the main driveway system. We install them to close quietly and stay square for decades.
Sliding Gate Installation
Sliding gates are common on Calabasas properties with sloped driveways where a swing gate would scrape or bind. We install cantilever and track-style sliding gates, paying close attention to the track channel debris problem that the Las Virgenes and Malibu Creek canyon winds create. The gate should glide in January and August, after Santa Anas and before.
Swing Gate Installation
Swing gates are the dominant style on the ornamental steel driveway entries throughout Calabasas. The critical work happens below grade: post footings poured deep, hinge brackets welded or bolted to reinforced steel, and operator arms sized so they never stall against a wind gust. We also handle double swing gates, which need paired operators and synchronized limit settings so both leaves open and close as one.
Double Gate Installation
A double gate adds a level of complexity that cheap installers get wrong: the two leaves must be matched in weight, the operators must be programmed to fire in sequence, and the center stop must be adjusted so the leaves do not slam each other in a Santa Ana gust. In Calabasas, we see double gates on the majority of estate driveways, and we build them to run quiet and true.
Security Gate Installation
Security gate installation in Calabasas typically means a heavy steel gate, a commercial-grade operator, and access control that the homeowner controls from a phone or keypad. We integrate video intercoms, license-plate readers, keypads, and loop detectors, and we pull the conduit and power runs that the original build never stubbed in. This is the work that makes a gate a real security barrier rather than a decorative fence section.
If you are adding automation to a gate that was installed manual during construction, or replacing a builder-grade operator that failed early, our Gate Installation team handles the full scope, from the new footing to the final programming.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Calabasas
We are trained and equipped on nine gate-automation brands, and in Calabasas we most often work on FAAC, Elite, LiftMaster, DoorKing, and Viking operators. These are the brands that dominate the high-end estates in The Oaks and Calabasas Park Estates, and each one needs brand-specific programming knowledge that mechanical repair alone cannot cover. We carry common parts and control boards for these systems, which means fewer return trips and faster completion for our Calabasas customers. When an HOA mandates a specific operator brand in the CC&Rs, we install that exact brand and document the model and serial number for the architectural committee file.
Common Gate Installation Problems We See in Calabasas Homes
After years of working gates in this city, certain failures repeat themselves. Here is what we regularly find:
- Builder-grade operators on wind-exposed double gates. The Santa Ana winds that funnel down Las Virgenes and Malibu Creek canyons put torque on a 20-foot double gate that a builder-grade operator was never sized to handle. We see stripped rack and pinion gears within two years of installation, and the fix is a properly rated operator and reinforced hinge post, not another cheap motor.
- Automation retrofitted without conduit or power. A gate that was installed manually during construction gets an operator added later, but no one pulls a dedicated conduit run for the safety photocell and keypad entry. The result is surface-mounted wiring that looks bad and often gets flagged by the HOA. We trench and stub the runs properly.
- Shallow post footings poured during the drywall phase. Calabasas hillside lots have expansive and shifting soils, and a footing poured too shallow will heave or lean under wind load. The operator binds, the motor burns out, and the gate stops mid-travel. We re-pour the footing, re-hang the gate, and set the operator on a reinforced bracket.
- UV-damaged powder coat on dark-finished gates. The inland Mediterranean sun here is intense, and dark ornamental gates that HOAs commonly require start chalking and delaminating within five to eight years. We match the HOA palette and apply a finish rated for this exact UV exposure, not a generic powder coat.
Last month our crew installed a FAAC swing gate operator at a Spanish Colonial off Paseo Primario in The Oaks. The original builder-grade operator had stripped its rack and pinion after repeated Santa Ana wind gusts torqued the hinge post. We poured a new post footing, re-hung the gate on a reinforced bracket, and pulled a dedicated conduit run for the safety photocell and keypad entry because the original build had none. That is the difference between a gate that closes and a gate that lasts.
Pricing for Gate Installation in Calabasas, CA
Here is what gate installation actually costs in Calabasas, based on our recent jobs in the 91302 and 91372 zip codes:
| Gate Type | Typical Calabasas Price Range |
|---|---|
| Pedestrian gate (steel or aluminum, manual) | $1,400 - $3,200 |
| Single swing driveway gate with automation | $2,800 - $6,500 |
| Double swing driveway gate with paired operators | $6,000 - $11,500 |
| Sliding driveway gate with automation | $3,500 - $8,000 |
| Full security gate package (heavy steel, operator, keypad, intercom, loop detector) | $7,000 - $15,000+ |
The HOA compliance layer in Calabasas can add cost: architectural review submittals, specific powder-coat finishes, and mandated operator brands all affect the final number. What we quote is what you pay. The price is agreed in writing before any work starts, and estimates are free. If you have a written estimate from another company, bring it in and we will give you a free second opinion. Call (925) 263-6107 and we will walk the site, measure the opening, and put the number on paper.
We Also Serve Cities Near Calabasas
While this page is focused on Calabasas, our crews also serve West Hills, Topanga, Canoga Park, and Winnetka. The HOA and wind-load conditions differ from one canyon to the next, and we tailor every installation to the specific site. For a full overview of our work across the region, see Gate Installation in Calabasas and the surrounding communities we cover.
Serving Calabasas, CA - Our Local Coverage Area
We’re based in the Calabasas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Calabasas
Yes. In The Oaks, Calabasas Park Estates, Mountain View Estates, and most other gated communities here, the CC&Rs require an architectural review before any gate or operator replacement. These CC&Rs often mandate a specific operator brand, such as LiftMaster or FAAC, and a powder-coat finish that matches the development palette. A gate that would pass in Woodland Hills can be rejected here for a shade mismatch. We pull the CC&R requirements before ordering materials and prepare the submittal package for you. Call (925) 263-6107 and we will walk you through the approval steps.
Because Calabasas sits at the mouth of Las Virgenes and Malibu Creek canyon corridors, Santa Ana wind events hit hillside swing gates with sustained lateral force that flatland gates never see. That wind load torques the hinge post, works the footing loose, and eventually bends the hinge brackets or strips the operator gearing. The real fix is a deeper post footing, a reinforced bracket, and an operator sized for the actual wind exposure, not the gate weight alone.
Yes, in most cases. A solar gate opener can be added to an existing wrought-iron gate as long as the gate swings freely and the post is sound. Calabasas gets strong inland sun, which helps solar charging, but shaded canyon lots or long winter stretches may need a larger panel or a battery upgrade. We will assess the gate and give you a straight answer on whether solar is the right call, or whether a simple AC power pull is more reliable for your site. Estimates are free.
A new automatic gate must comply with UL 325 and ASTM F2200 entrapment protection standards, which means a minimum of two independent entrapment protection devices, typically safety photocells plus a reversing mechanism on the operator. The gate must also have proper clearance, mesh or guard paneling if the open fence area exceeds allowable limits, and signage. We install every Calabasas gate to meet current UL 325 and ASTM F2200 standards, and we document the protection devices in the job file.
After the Woolsey Fire burned through hillside Calabasas in November 2018, several HOAs updated their CC&Rs to require non-combustible metal construction and prohibit wood-composite gate panels. If you are rebuilding or replacing a gate in an affected tract, expect to need solid steel or wrought iron, not a composite panel. Those post-fire gate systems are now entering their first major service cycle, which means we see a cohort of similarly aged operators approaching replacement at the same time. We can tell you what your specific HOA currently requires before you spend a dollar.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Calabasas and the surrounding communities for over 42 years.
Contact Ironworks Gate Co. for Gate Installation in Calabasas
If you need a gate installed, automated, or replaced in Calabasas, call us at (925) 263-6107. A live person answers, 24 hours a day, 7 days a week. We will schedule a free site measure, pull your HOA requirements, and put a written price in your hand before any work starts. Done right, and backed in writing.