Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterWhy Tarzana Homeowners Choose Ghost Controls Gate Repair
We provide Tarzana Ghost Controls service across the area, from the ranch-style tracts south of Ventura Boulevard to the hillside estates climbing toward the Santa Monica Mountains. If your Ghost Controls opener is beeping but not moving, drifting open on a slope, or showing offline on your phone, we diagnose it the same day and quote the repair before any work begins. We are not a Ghost Controls dealer and we are not authorized by the manufacturer. We are a dedicated gate company that has been fixing Ghost Controls systems in Tarzana for years, and we know their failure points better than most.
Call (925) 263-6107 and a live person answers, 24 hours a day.
Why Trust Ironworks Gate Co. for Your Ghost Controls Gate Repair?
Our field team has spent years troubleshooting Ghost Controls openers across Tarzana’s deep-lot estates and gated driveways. We see the full lifecycle of their AXDP and R Series systems, from misaligned limit cams to waterlogged control boards, and we service them independently. No dealership quotas, no manufacturer upsell. Just repair-first honesty.
Victor Salinas, our owner, grew up off Reseda Boulevard in Tarzana, not far from the old Braemar Country Club. He learned metalwork and electrical systems at Los Angeles Pierce College in Woodland Hills, where a shop instructor told him early on that a gate is only as honest as the person who built it. Victor has spent the better part of four decades doing Gate Repair work across the West Valley, and he still believes that. When our technicians open a Ghost Controls control box, they are not guessing. They know which board revision tends to corrode, which limit nut drifts, and which battery tray swells in Tarzana’s heat. That is what saves you a second service call.
Every Ghost Controls repair we complete is protected by our 90-Day Done Right Promise. It is written, not verbal. If something is not right, we come back and make it right. No arguing, no paperwork, no exceptions. That is the Keystone Standard we apply to every job we touch.
Common Ghost Controls Gate Repair Problems We Fix in Tarzana
- AXDP control board corrosion causing dead or intermittent gates. The AXDP series dual-swing openers use a control board with a protective coating that can fail at the relay solder joints after years of Tarzana’s morning valley dew and irrigation overspray. The gate beeps, the app shows something, but the arms do not move. We clean the board, reflow the joints with anti-corrosion sealant, and replace the board only when the damage is beyond saving.
- R Series limit nut drift after Santa Ana wind events. The R Series linear arm slide gate openers rely on mechanical limit nuts that can drift after repeated wind buffeting. The result is a slide gate that short-strokes against the post, stops halfway, or reverses for no apparent reason. We reset and lock the limit nuts, then test the full travel under load before we leave.
- Ghost Pro 200 Wi-Fi module losing pairing after utility brownouts. Tarzana sits in the San Fernando Valley interior, where summer heat strains the grid and brownouts happen. The Ghost Pro 200’s Wi-Fi module sometimes drops its pairing after a power dip and refuses to reconnect without a manual relearn. We re-establish the pairing and, where needed, harden the power feed so a brownout does not knock the opener offline again.
- DSL battery tray swelling from heat exposure inside unventilated steel posts. The DSL series solar-compatible linear actuators are popular on Tarzana properties without a convenient power run. But the battery tray sits inside a steel post that bakes in Valley heat, and the plastic tray can swell and crack, killing backup capacity. We replace the tray, check the charging circuit, and often relocate the battery box to a shaded mounting point.
- Stripped gearboxes on heavy ornamental gates. North of Ventura Boulevard, many Tarzana driveways hang heavy wrought-iron or ornamental steel gates on Ghost Controls operators. When a gearbox strips under that load, no amount of limit adjustment fixes it. We repair what is fixable and tell you straight when a gearbox replacement is the only honest option.
Ghost Controls Parts & Our Repair-vs-Replace Approach
We source genuine Ghost Controls boards and motors when lead time allows. For out-of-production AXDP boards, we install heavy-duty aftermarket replacements with matching amperage ratings, never something undersized that will burn out in a Tarzana summer. We stock the common Ghost Controls parts locally: limit switches, control boards, battery trays, remotes, and receiver modules. That means most repairs happen in a single visit, not a two-week wait on a freight box.
Our repair-vs-replace rule is simple. We repair what is fixable, like freeing corroded hinge cam pins or reflowing a board’s solder joints. We recommend a full opener swap only when the gearbox is stripped or the motor windings are burned. You get the honest answer, quoted upfront, before a single bolt is turned. Call (925) 263-6107 and we will walk you through what we are seeing.
Our Ghost Controls Service Process - Step by Step
- 1
Diagnosis. We start with a full inspection of your Ghost Controls opener: control board, motor, limit settings, battery backup, and the gate itself. We look for the Tarzana-specific issues first, like dew corrosion on AXDP boards or heat-damaged DSL battery trays.
- 2
Repair or install. We quote the work before we start. Once you approve, we repair or replace the failed part using genuine Ghost Controls components or a properly rated aftermarket equivalent. We never begin work without your sign-off on the price.
- 3
Test. We cycle the gate through full open and close under load, check safety reversal and obstruction detection, and confirm the app or keypad is talking to the opener correctly. On hillside driveways north of Ventura, we pay special attention to anti-drift and torque calibration so the gate does not creep or slam.
- 4
Warranty. Every Ghost Controls repair is covered by our written 90-Day Done Right Promise. If something is not right, we come back. That is the deal.
Ghost Controls Products We Service & Install in Tarzana
We service and install the full Ghost Controls lineup that shows up on Tarzana driveways: the AXDP series dual-swing gate openers, the R Series linear arm slide openers, the Ghost Pro 200 smartphone-enabled swing gate kit, and the DSL series solar-compatible linear actuators. We keep common remotes, keypads, and receivers on our trucks, and we can order less common Ghost Controls parts quickly when a job calls for it. If you are not sure which model you have, open the control box and read the label, or call us and we will help you identify it over the phone.
We Also Service These Brands
Ghost Controls is one of nine gate automation brands we are trained and equipped to service, including Ghost Controls repair in Reseda. If your property has a LiftMaster, Mighty Mule, or DoorKing opener, we handle those too, along with FAAC, BFT, Linear, Viking, and Elite. One call covers whatever is on your driveway.
FAQs - Ghost Controls Gate Repair Service in Tarzana
No. We are an independent Ghost Controls service provider. We are not a dealer and we are not manufacturer-authorized. What we are is experienced. Our technicians work on Ghost Controls systems across Tarzana every week, and we know these openers from the inside out.
We use genuine Ghost Controls boards and motors when they are available and the lead time works for your repair. For out-of-production parts, like older AXDP control boards, we install heavy-duty aftermarket replacements with matching amperage ratings. We tell you which option we are using and why before any work starts.
Most Ghost Controls repair in Canoga Park and Tarzana are completed in a single visit. We stock common Ghost Controls parts on our trucks, so we are not waiting on a shipment for most board, limit switch, or battery tray replacements. If a specialized part needs to be ordered, we give you a straight timeline before we begin.
The double beep on an AXDP typically means the control board is receiving a signal but the motor circuit is not engaging. In Tarzana, we most often trace this to corrosion on the relay solder joints or a failed motor capacitor, both common after years of valley dew and heat. We diagnose it on site and quote the fix before any work begins. Call (925) 263-6107 for an exact diagnosis and estimate.
If your Ghost Controls opener is still under manufacturer warranty, we can work with you on warranty-safe service. As an independent provider, we do not process Ghost Controls warranty claims, but we do not do anything that would void a valid warranty. We will tell you plainly if your issue likely falls under manufacturer coverage and point you in the right direction.
Ghost Controls repairs in Tarzana typically run from about $180 for a simple limit switch reset or remote reprogram to $450-$700 for a control board replacement or gearbox repair, depending on the model and the parts involved. We quote the full price before any work begins, and every completed job is covered by our 90-Day Done Right Promise. Call (925) 263-6107 for a free estimate.
Book Your Ghost Controls Service in Tarzana, CA
A gate should open when you want it to and stay closed when you don’t. Everything else is just keeping that promise. If your Ghost Controls opener is not keeping it, call (925) 263-6107. A live person answers, we quote the repair honestly, and we stand behind the work in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Tarzana and the West Valley since 1984.