Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Gate Repair in Tarzana, CA | Ironworks Gate Co.
We repair Ghost Controls gate openers across our Tarzana service area, and we do it as an independent service provider, not a manufacturer affiliate. The Ghost Controls work we handle here carries one local difference worth knowing: on the steep blocks north of Ventura Boulevard, factory torque settings will not hold a heavy gate. That means most of our Ghost Controls calls in Tarzana end with recalibration, and the fix lasts. Call (925) 263-6107 and we will send a tech who has already worked on dozens of these exact units in this exact terrain.
Why Tarzana Residents Choose Us for Ghost Controls Service
We have been repairing Ghost Controls operators in Tarzana long enough to know which failures show up on a flat ranch house in the south end and which show up on an estate driveway climbing toward the Santa Monica foothills. Victor Salinas, our owner, grew up off Reseda Boulevard not far from the old Braemar Country Club, and the gate work we do in this area is not a side line. Our techs carry Ghost Controls diagnostic tools and a stock of discontinued control boards and torque limiters, so a second trip for a part is rare. When a TSS1 on Avenida Oriente reverses mid-cycle, we already know what the board looks like inside before we open the panel. We are independent, we are local, and we stand behind the repair with our written 90-Day Done Right Promise. That is how we approach Ghost Controls sales & service for every customer.
Common Ghost Controls Gate Repair Problems We Solve in Tarzana
- FX12 control board overheating. Tarzana summers push past 105°F regularly, and that heat sits inside a metal enclosure with no place to go. We see swollen capacitors and random gate reversals on FX12 boards in Tarzana’s estate neighborhoods more than anywhere else in the Valley. The fix is a high-temp-rated replacement, not another OEM board with the same thermal ceiling.
- Premature gear wear on TSS1 and TDS2 operators. The heavy ornamental iron gates common north of Ventura Boulevard strain the gear train whenever torque limiters are left at factory spec. We re-torque every Ghost Controls operator we touch in Tarzana to match the actual weight and grade it is working against.
- Santa Ana debris jamming arm travel sensors. When the wind funnels through the Valley gaps, it carries leaves, grit, and eucalyptus bark straight into the arm mechanism on Ghost Controls swing operators. The result is intermittent obstruction errors that look like a control board problem but are not.
- Photocell alignment drift. Surface-mounted photocells on hillside gates shift over time as the ground settles and the sun beats on the mounting brackets. The gate refuses to close or stops halfway. We realign and resecure them properly.
- Drifting swing gates after a power outage. On a slope, a Ghost Controls operator with a drained battery or lost torque calibration will let the gate drift open under its own weight. Homeowners often assume the motor is shot. Half the time it is a torque adjustment and a battery check.
Ghost Controls Service in Tarzana: What Local Conditions Mean for Your Equipment
Here is the fact that changes everything for Ghost Controls owners in Tarzana: the older estate gates in the hills north of Ventura Boulevard were set using flatland settings, because that is what the original installers had. A Ghost Controls operator on a steep driveway on Reseda Boulevard or Avenida Oriente is working against gravity every second the gate is closed, not just when it is moving. Without proper torque calibration and anti-drift adjustment, the gate creeps open or slams shut, and the operator burns through limit switches and gears trying to compensate. We tune every Ghost Controls unit we service in Tarzana to the actual grade of the driveway, the actual weight of the gate, and the actual wind load it catches during Santa Ana events. A factory default setting is a starting point, not an answer. That is the difference between a repair that lasts and one that fails again by August.
Ghost Controls Models & Products We Service in Tarzana
We repair the full Ghost Controls line that Tarzana homeowners actually have on their properties: the TSS1 single swing opener, the TDS2 dual swing opener, the TSS1XP with battery backup, and the AXDP dual swing model. For safety-critical components, we install OEM Ghost Controls control boards and arm assemblies. For parts that fail from heat and weight, we substitute heavier-duty aftermarket limit switches and capacitors rated for Tarzana’s summer temperatures and the heavier iron gates common in the north end. We quote repair first when the gearbox is sound. We recommend full replacement only when a housing is cracked or the motor windings are burnt, and we can show you the damaged part right there on the ground before we order anything new.
Ghost Controls Service Pricing in Tarzana
The cost of a Ghost Controls repair in Tarzana depends on what failed and where the gate sits. A control board replacement on a flat lot in the south end usually runs less than the same job on a steep hillside estate, because the hillside work takes longer and often includes torque recalibration and photocell realignment. What you will always get from us is a written price before any work starts. That price is the price. We do not discover new charges halfway through, and we do not send a surprise invoice. Call (925) 263-6107 for a free estimate on your Gate Repair in Tarzana, and we will tell you straight what it needs and what it costs.
Serving Tarzana, CA - Our Local Coverage Area
We’re based in the Tarzana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Ghost Controls Gate Repair in Tarzana
The most common cause on Tarzana hillside properties is a heat-stressed FX12 control board with swollen capacitors, which misreads the gate position and triggers a false obstruction reversal. A secondary cause is torque loss on the grade, which makes the operator fight itself. We diagnose both on-site and have the parts on the truck for a same-visit fix. Call (925) 263-6107 and we will get it sorted.
In most cases we can repair it, provided the motor windings are not burnt and the housing is not cracked. Heavy iron gates do wear the gear train faster, but the usual culprit is misadjusted torque limiters, not a dead operator. We will open the unit, show you the condition of the gears and board, and quote repair before recommending replacement. An honest repair beats a new opener whenever the gearbox is still sound.
Santa Ana winds push debris into the arm travel sensors and the track area, which causes intermittent obstruction errors and mid-cycle reversals. They also stress the hinges and the operator arm on broad, heavy gates. After a wind event, we recommend checking the sensor path and the arm mounting, not just assuming the motor is failing. If your gate started acting up after a windy week, call (925) 263-6107 and we will inspect it.
Yes, we install battery backup kits on existing TSS1 and TDS2 units, and we stock the TSS1XP for customers who want an integrated battery solution. Tarzana’s power grid sees strain during summer heat waves, and a gate without backup becomes a dead weight during an outage. We can add battery capability to your current Ghost Controls opener through our Gate Installation in Tarzana so the gate keeps working when the neighborhood goes dark.
It is not normal, but it is common on hillside Tarzana properties. After a power loss, the operator loses its torque calibration, and on a slope the gate drifts open under its own weight. This is a calibration and anti-drift adjustment issue, not a motor failure in most cases. Call (925) 263-6107 and we will re-torque the operator and secure the gate properly.
Service Areas Near Tarzana
We run Ghost Controls service calls throughout the West Valley. Along with our Tarzana work, we regularly repair Ghost Controls operators in Reseda, Ghost Controls service in Reseda, and we cover Canoga Park and Winnetka as well, including Ghost Controls service in Canoga Park. Encino and Northridge are within our normal route, and we know the housing stock and gate styles in each area well enough to bring the right parts on the first trip.
Book Your Ghost Controls Service in Tarzana Today
If your Ghost Controls gate is acting up in Tarzana, call (925) 263-6107. We answer the phone live, we show up when we say, and we settle the price before a single bolt is turned. Same-day service is available for most repair calls, and you will get the 90-Day Done Right Promise in writing. For 42 years, that has been the way we work. It is not changing now.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Tarzana since 1984.