Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Granada Hills
Gate installation in Granada Hills usually runs between $2,800 and $9,500 depending on whether we’re replacing an existing gate or building new from the footing up. A standard single swing gate on a flat driveway typically lands around $3,200 to $4,800, while a double driveway gate with automation runs $5,500 to $9,500. Most Granada Hills installations take one to two days on site, and every job is protected by our 90-Day Done Right Promise in writing. We’re Ironworks Gate Co., and we’ve been hanging gates, welding posts, and wiring operators for over 42 years. If you’re considering a new gate or replacing one that’s been sagging since the 1990s, call (925) 263-6107 and we’ll come measure, quote, and walk you through the right option for your property.
Why Ironworks Gate Co. Is Granada Hills’s Preferred Gate Installation Company
Granada Hills homeowners call us because we understand what this neighborhood’s gates actually go through. We’ve worked on properties along Balboa Boulevard, up the hillside pockets near Knollwood, and throughout the ranch-home tracts that define the 91344 and 91394 zip codes. The gates here are not like gates in Burbank or Sherman Oaks. Many were hung before modern safety codes existed, and many more sit on footings that got poured in a hurry after the 1994 Northridge earthquake. When a Granada Hills customer calls about a gate that won’t close or a post that’s leaning, we already know what we’re likely to find before we arrive. That local knowledge means fewer return visits and a straight answer on the first call.
Our reputation in Granada Hills is built on showing up when we say we will and standing behind the work. Reviewers consistently mention that our technicians were on time, explained the work in plain English, and left the driveway cleaner than they found it. Our crews are background-checked and uniformed, and they treat your property the way they’d treat their own mother’s. We’re not the cheapest gate company in Granada Hills, and we don’t try to be. We’re the company that fixes the problem correctly so you don’t call again in six months. Dispatch for Granada Hills is coordinated from our Los Angeles office, and we keep response times tight because we know a gate that won’t open means you’re not leaving your own driveway.
Our Gate Installation Services in Granada Hills
Every Gate Installation we do in Granada Hills starts with the footing. That’s the part most people never see and the part that determines whether your gate still works in twenty years. From there we handle the steel, the hinges, the operator, and the safety systems. Here’s what we install most often in Granada Hills.
Driveway Gate
Driveway gates in Granada Hills need to handle heat, wind, and decades of daily cycles. We install single and double driveway gates in steel and wrought iron, sized to your opening and matched to the operator you already have or the one we recommend. On the wide ranch-home driveways common in Granada Hills, a double gate often makes better sense than one oversized leaf. Call (925) 263-6107 for a free measure and a written quote before any work starts.
Pedestrian Gate
A pedestrian gate gives you daily access without cycling the big driveway gate every time. We hang them to swing true on their own posts, with hardware that won’t sag. On Granada Hills properties where the pedestrian gate sits near the house, we pay extra attention to latching and closing speed so you’re not listening to it slam in the wind.
Sliding Gate
Cantilever and V-track slide gates are common on Granada Hills lots where the driveway slopes or where a swing gate would eat too much apron space. We install slide gates with the right roller spacing and track alignment for the wind loads this area gets. Santa Ana gusts funnel through the canyon mouths and hit these gates hard. A slide gate that’s installed square and weighted correctly stays on its rollers; one that isn’t will jump track by November.
Swing Gate
Swing gates are the classic Granada Hills look, especially on the older ranch homes and the hillside entries near Knollwood. We install single and double swing gates on new posts or existing masonry pillars, using hinges rated for the gate’s full weight plus wind load. On pillar-mounted gates, we inspect the footing before we hang anything. If the base has rotated or cracked, new hardware won’t fix it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Granada Hills
Ironworks Gate Co. is factory-trained on the automation brands most Granada Hills homes actually have. That includes Viking, DoorKing, and Ghost Controls, along with the other major names we service daily. When you need a new operator installed or an old one replaced, we can match the panel to your existing wiring and keypads. We keep common parts and control boards stocked for Granada Hills customers, which means fewer multi-week waits and fewer second visits. Whether your current operator is ten years old or thirty, we’ll give you an honest read on whether it’s worth saving.
Common Gate Installation Problems We See in Granada Hills Homes
Here’s a small correction to the way most quick-bid gate companies describe their work. We don’t need a paragraph to describe what its own list says. Let’s just lay out the problems.
- Hairline cracks in post-Northridge masonry footings. Many Granada Hills gate pillars were rebuilt quickly in 1994 and 1995. Thirty years later, those footings are cracking and rotating. The gate sags no matter how many times hinges get swapped. Fixing it requires excavating and repouring the base, not another hinge adjustment.
- Santa Ana wind damage to slide gates and swing gates. Wind gusts funnel through the canyon mouths near the northern edge of Granada Hills. Cantilever gates jump their rollers. Swing gates slam into their frames hard enough to torque the hinges and knock the operator out of alignment.
- Obsolete control boards without modern safety photocells. Operators installed before UL 325 entrapment protection standards are everywhere in Granada Hills. These boards let a gate close on a car or a person. They cannot be legally retrofitted to current safety requirements. Replacement is the only correct answer.
- Thermal expansion warping steel gates every summer. Granada Hills regularly tops 100°F in July and August. Steel expands under that heat. Operators that worked fine in March start throwing limit errors in August. Installation tolerances have to account for that range.
Pricing for Gate Installation in Granada Hills, CA
Let’s talk actual numbers. A single swing gate installed on a new steel post in Granada Hills runs $2,800 to $4,200. A double driveway gate with a new operator runs $5,500 to $9,500. A slide gate on a flat track typically lands between $4,000 and $7,000, depending on length and whether the track needs concrete work. If your existing posts are sound, the price drops. If the footings need excavating and repouring, that adds $600 to $1,400 per footing. Every quote is written, itemized, and agreed before we start. You will never open a bill larger than the quote on the same scope. We offer a free second opinion on any written estimate, and our $89 seasonal tune-up is available any time. For an exact quote on your Granada Hills property, call (925) 263-6107.
Here’s the honest breakdown on timing. A typical single gate installation in Granada Hills takes one full day. A double gate with new masonry work takes two. Repairs on existing hardware can often be done in one visit. If your gate is half-open and you can’t move it, call us and we’ll get the right crew to Granada Hills quickly.
We Also Serve Cities Near Granada Hills
Ironworks Gate Co. serves Granada Hills and the surrounding San Fernando Valley. Our crews regularly work in Northridge, Panorama City, Chatsworth, and Reseda. If you’re near the Granada Hills border and we’ve helped your neighbors, we can likely help you too. For Gate Installation in Granada Hills or any nearby community, call (925) 263-6107.
Serving Granada Hills, CA - Our Local Coverage Area
We’re based in the Granada Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Granada Hills
If the gate sags at the latch end but the hinges look intact, the hinge post has likely rotated in its footing. This is common in Granada Hills because many masonry pillars were rebuilt quickly after the 1994 Northridge earthquake, and the new footings were not always poured deep enough. Hairline cracks at the base of the pillar are the tell. If you see them, new hinges won’t fix the sag. We excavate and repour the footing, then re-hang the gate. Call (925) 263-6107 and we’ll take a look.
No. Pre-UL 325 operators cannot be legally retrofitted to modern entrapment protection standards. The control boards simply don’t support the required monitored photocells and reversing edges. We can reuse your existing wiring and keypad in many cases, but the operator and board need to be replaced as a unit. It’s safer, and it usually costs less than a full new gate.
The wind loads on a slide gate are enormous when gusts funnel through the canyon mouths. If the gate jumps its rollers during a Santa Ana, the track is likely misaligned, the roller spacing is wrong for the gate’s length, or the gate’s weight distribution is off. We fix it by re-leveling the track, correcting the roller configuration, and sometimes adding a wind-rated catch. A properly installed cantilever gate in Granada Hills won’t leave its track in normal wind events.
Yes, if your property falls within the Very High Fire Hazard Severity Zone, which covers the hillside sections of northern Granada Hills. LA City code requires an approved emergency-responder override system, and a Knox key switch is the standard method. We install them on every new automated gate in those zones and can retrofit them to most existing operators. If you’re not sure whether your property qualifies, call (925) 263-6107 and we’ll check the zone map for you.
For a wide, flat driveway on a typical Granada Hills ranch lot, a double swing gate is usually the best choice. It balances the load across two posts, reduces the clearance needed for the leaves to open, and matches the architectural style of most 1950s-to-1970s ranch homes in the neighborhood. If the driveway slopes toward the street, a slide gate may work better because swing leaves would drag. Every home is different, which is why we measure before we quote. Estimates are free, and the price is written before any work starts.
Call Ironworks Gate Co. for Gate Installation in Granada Hills, CA
If your gate has been sagging since the Clinton administration, or you’re ready for a new one that actually fits your home and your driveway, call us. We’ll send a technician to Granada Hills, measure the opening, check the footings, and give you a written quote with no surprises. A live person answers every call, 24 hours a day. Reach us at (925) 263-6107.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Granada Hills and the San Fernando Valley with gate installation, repair, and automation since 1984.