Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Reseda
Gate installation in Reseda costs roughly $1,400 for a basic single swing gate and runs $3,200 to $7,500 for a full automated double driveway system, hardware and opener included. Most Reseda jobs are completed in one day once materials arrive. If you’re calling from anywhere between Sherman Way and Vanowen Street, we can usually have a technician at your property within a few hours to measure and give you a written price before any work starts. Call (925) 263-6107 and a live person answers, day or night.
Why Ironworks Gate Co. Is Reseda’s Preferred Gate Installation Company
Most gate companies in the Valley treat Reseda like any other stop on the 101. We don’t. We know that a gate hung off a cracked post-quake footing on Saticoy Street will sag again within six months no matter how many times you adjust the hinges. We know that a powder-coated steel gate on a south-facing wall off Victory Boulevard needs UV-stable seals or the operator board will fry by its third summer. That kind of local knowledge only comes from doing the work here for decades, pulling the old posts out of the ground and seeing what’s underneath.
Homeowners in Reseda call us because they’ve already been through the cycle: a handyman patches the gate, it fails, they call someone else, it fails again. Victor Salinas started Ironworks Gate Co. to be the company that ends that cycle. Every job we complete in Reseda carries the 90-Day Done Right Promise in writing. If it isn’t right, we come back and make it right. No disputes, no phone tag, no fine print. That standard applies whether we’re welding a new hinge plate onto a 40-year-old post behind a house on Lindley Avenue or installing a full automated sliding gate system on a double lot near Reseda Boulevard.
We answer the phone 24 hours a day. A background-checked, uniformed technician shows up when we say he will. The price is settled before a single bolt is turned. For homeowners between 55 and 75 who’ve lived here twenty years or more and plan to stay, that’s the whole pitch. Done right, backed in writing, and we stand behind it.
Our Gate Installation Services in Reseda
Driveway Gate
A driveway gate in Reseda is more than a gate. It’s the first thing you see pulling onto a ranch house lot off Sherman Way, and it has to hold up to 110°F July heat and the Santa Ana winds that hit swing gates broadside each fall. We install both single and double driveway gates, set on footings sized for the post-quake soil conditions common across Reseda. We also handle the automation: operators from LiftMaster, DoorKing, Elite, and other major brands, wired or solar, with safety photocells brought up to current UL 325 code.
Pedestrian Gate
Pedestrian gates in Reseda are often hung between the house and a concrete block wall that’s been standing since the Kennedy administration. Those old walls weren’t poured with gate hardware in mind, so we typically core-drill and epoxy-set stainless steel anchors rather than relying on shallow tapcons. It’s a small detail that means the gate still opens square ten years from now. We build pedestrian gates in steel, aluminum, and ornamental iron, matched to your existing driveway gate hardware.
Sliding Gate
Sliding gates are common on Reseda’s wider double lots and side-by-side driveways, where swing gates would eat half the front yard. The recurring problem we see is aging cantilever track hardware: rollers worn flat, nylon wheels cracked from the heat, and rack and pinion drives stripped where thermal expansion in August bound the gate against the stop post. We spec expansion gaps and install galvanized track with sealed bearings so a sliding gate on a Reseda driveway opens and closes like the day it was hung, even at two in the afternoon in August.
Swing Gate
Swing gates on Reseda’s postwar ranch properties fail from two things: footing settlement and hinge hardware that wasn’t big enough to begin with. The 1994 Northridge earthquake cracked a large share of gate post footings in this neighborhood, and many of those repairs from the mid-1990s are now out of plumb. We don’t just re-hang a sagging swing gate; we break out the old concrete around the hinge post when it’s needed, set a deeper epoxy-set footing, and reinstall with adjustable heavy-duty hinges that let the gate be trued up over time. That’s the difference between a repair and a re-do.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Reseda
We’re certified on nine gate-automation brands, including DoorKing, Elite, Mighty Mule, and LiftMaster. That matters in Reseda because gate openers here get worked hard: summer heat cooks the boards, Santa Ana winds overload the motors, and power quality on the older streets off Vanowen can spike. When drive gates fail, we repair whatever’s on the driveway, not whatever brand we happen to sell. We carry common boards, remotes, and replacement parts stocked locally for fast turnaround, so a Reseda customer isn’t waiting on an east coast warehouse.
Common Gate Installation Problems We See in Reseda Homes
- Post-quake footing settlement under hinge posts. The 1994 Northridge earthquake epicenter was directly beneath Reseda, and many gate post footings were patched quickly in the years after. Three decades on, those patches are cracking and settling, throwing swing gates out of alignment no matter how well the hinges are adjusted. We inspect the footing before we re-hang anything.
- Thermal expansion in 110°F heat. Reseda sits on the flat Valley floor and gets hotter than most of Los Angeles. Metal gate frames expand on summer afternoons, double swing gates bind against each other, and slide gate racks strip if no expansion gap was specified. We build that gap into every installation.
- Santa Ana wind loading on hinge bolts. The winds that come through the Valley each fall put repeated lateral stress on swing gate hinges. We routinely see hinge post bolts that are bent or stripped, especially where 1990s post-patchers used undersized anchors. We install through-bolts and heavy-duty weld-on hinges that don’t work loose.
- Operator boards failed from direct sun. Automatic gate operator boards mounted inside black metal boxes on south-facing Reseda walls run hot enough to fail within a few summers. We install ventilated weather-tight enclosures with UV-stable seals, or relocate the operator out of direct afternoon sun when the layout allows it.
Pricing for Gate Installation in Reseda, CA
A basic single swing gate with steel frame and welded pickets in Reseda runs $1,400 to $2,800, including posts and hardware. A double swing gate system typically lands between $2,900 and $5,500. Full sliding gate systems with automation run $3,200 to $7,500 depending on the length and operator brand. Adding solar power, a keypad, vehicle exit sensor, or intercom pushes the total up by $400 to $1,800. If your job requires breaking out and replacing a post-quake footing, budget an additional $600 to $1,200 per post. We give you a written price before any work begins, and that price is the price. Standing offers apply to Reseda homeowners: $50 off any repair over $250, and a permanent 5% senior and veteran discount, always. Call (925) 263-6107 for a free estimate.
We Also Serve Cities Near Reseda
Ironworks Gate Co. runs crews throughout the west Valley. Along with Gate Installation across Reseda, we serve homeowners in Winnetka, Northridge, Tarzana, and Encino. Scheduling is coordinated from our Los Angeles office, with technicians dispatched to Reseda daily.
Serving Reseda, CA - Our Local Coverage Area
We’re based in the Reseda area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Reseda
Look for three signs: a visible crack running through the concrete block around the hinge post, a gap widening between the gate and the post at the top hinge, and a gate that has been hinge-adjusted twice or more in the last five years. On a ranch home off Vanowen Street, our crew found a hinge post shifted nearly two inches out of plumb because the post-quake footing had cracked and spalled from years of summer heat and wind loading. We broke out the old concrete, set new stainless steel anchor bolts in a deeper epoxy-set footing, and re-hung the gate with adjustable heavy-duty hinges. If your post is moving, hinges alone won’t fix it. Call (925) 263-6107 and we’ll tell you straight.
Yes. Reseda is part of the City of Los Angeles, so replacing a manual gate with an automated one technically falls under LA City building permit requirements. Many contractors working out of Ventura County or smaller Valley cities don’t think about this until the inspector shows up. We handle the permitting paperwork as part of the installation and make sure the operator and safety edges meet current code before the final inspection. It’s one of those bureaucratic layers that adds time if you don’t plan for it, and adds fines if you ignore it.
In most cases on Reseda’s postwar lots, yes. Side-by-side double driveways on flat rectangular lots usually do better with a single slide gate: less hardware to fail in the Santa Ana winds, fewer footings to settle, and the gate doesn’t take up yard space when opening. A slide gate does need a longer track run along the inside of the wall, so it works best when your driveway has a straight run parallel to the property line. We can measure it and give you a comparison price for both options before you commit.
For most Reseda properties, hot-dipped galvanized hardware is sufficient, but we do recommend stainless steel fasteners anywhere hardware contacts concrete block, especially near irrigation sprinklers. Reseda doesn’t get the salt air of a coastal neighborhood, but sprinkler overspray hitting galvanized hinges for twenty years causes rust-through and snapping that we see regularly on older installs. The epoxy-set anchor bolts we use in post-quake footings are stainless as standard, because you never want to dig those out again. Painted gates should be powder-coated over galvanized steel, not raw steel with paint over primer.
Yes, solar openers work well in Reseda thanks to reliable sun, but the panel and battery need to be placed out of direct afternoon heat or they’ll degrade years early. A solar panel mounted flat on a south-facing black metal box on a 106°F Reseda afternoon can exceed 150°F, and lithium batteries sitting in that heat lose capacity fast. We mount panels on a tilt bracket away from operator enclosures and use ventilated battery boxes. For most Reseda homes, we recommend a solar system sized with two days of battery reserve for cloudy winter stretches, not just the minimum. Call (925) 263-6107 for a free estimate on any gate installation or replacement in Reseda.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving gate installation and repair customers across Reseda for more than 40 years.