Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Van Nuys
Gate installation in Van Nuys runs anywhere from $2,800 for a basic single swing gate to $14,000+ for a full sliding security gate with automation and access control. Most homeowners in the 91401, 91404, and 91405 ZIP codes spend between $4,500 and $8,500 for a complete driveway gate, posts, motor, and safety system. We’re Ironworks Gate Co., and we’ve been building and installing driveway gates across the San Fernando Valley for over 42 years. Victor Salinas leads our installation crews, and he’ll tell you the same thing we tell every Van Nuys homeowner: the gate has to be built for this heat, this soil, and these Santa Ana winds, or it won’t last. Call (925) 263-6107 and we’ll send a technician to measure, quote, and walk you through exactly what your property needs.
Why Ironworks Gate Co. Is Van Nuys’s Preferred Gate Installation Company
Van Nuys homeowners call us because we understand what this valley does to a gate. The deep interior heat, the cracked concrete driveways, the block walls that were never intended to hold a 400-pound swinging iron gate. Those aren’t problems you learn about in a manual. They’re problems you learn by installing gates here, summer after summer, decade after decade.
Our installation crews are background-checked and uniformed, and they work the way they would in their own mother’s driveway. That’s not a slogan. It’s the K.E.Y.S. code we built the company on: Krafted right, Every time, Your home first, Standing behind it. We answer the phone with a live person 24 hours a day, seven days a week. Not a voicemail tree, not an answering service. When a Van Nuys gate fails on a 108-degree afternoon, you call and a person picks up.
Every gate installation we complete in Van Nuys is protected by our 90-Day Done Right Promise. Written, no paperwork, no arguing. If something isn’t right, we come back and make it right. That guarantee is the Keystone Standard on every job, from a pedestrian gate off Sepulveda Boulevard to a double driveway gate in a 1960s tract home near Vanowen Street.
Our Gate Installation Services in Van Nuys
We specialize exclusively in driveway and estate gates. That focus matters. A general contractor who installs twelve different things cannot know gate footings, wind load, thermal cutoff limits, and UL 325 entrapment protection the way we do. Here’s what we install most often in Van Nuys.
Driveway Gate Installation
Driveway gates in Van Nuys take more punishment than almost any gate in Los Angeles County. The south- and west-facing exposures on blacktop driveways mean the operator sits in full sun through the hottest part of the day, and the gate itself thermally expands against its latch post. We spec Gate Installation components for this reality: deeper footings, thermal-rated operators, and clearances that account for metal expansion at 110 degrees. A typical single driveway swing gate installation in Van Nuys runs $3,800 to $6,500, including the operator, safety photocells, and concrete work.
Pedestrian Gate Installation
Pedestrian gates here see a different kind of stress. The dense stock of 1960s and 1970s apartment complexes along Vanowen Street and Sepulveda Boulevard cycle their pedestrian security gates dozens of times daily. That’s hundreds of cycles a week, thousands a month. We install pedestrian gates with commercial-grade hinges and closure devices that tolerate that abuse without sagging. Expect to pay $1,900 to $3,500 for a fully installed pedestrian gate with a keypad or card reader in Van Nuys.
Sliding Gate Installation
Sliding gates are the right answer for many Van Nuys properties where the driveway slopes up from the street or where a swing gate would arc into the sidewalk. The challenge here is the track and the footing. Van Nuys tract homes from the 1945 to 1965 building boom sit on compacted fill that heaves when winter rains saturate it. A sliding gate track poured on an inadequate footing will shift, bind, and eventually fail. We pour foundations deep enough to stay put through wet winters and dry summers. Sliding gate installations in Van Nuys typically run $6,000 to $12,000 with automation.
Swing Gate Installation
Swing gates remain the most common choice for Van Nuys single-family homes. They’re simpler, they work on flatter driveways, and they give you that classic driveway presence. But a solid infill metal or wood swing gate becomes a sail during Santa Ana events. We weld and reinforce gate frames for wind load specifically, and we size operators to push that gate through a 60-mile-per-hour gust without straining. Budget $3,200 to $6,000 for a single swing gate with automation, and $5,000 to $10,000 for a double gate.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Van Nuys
We install and service automation from LiftMaster, DoorKing, Elite, FAAC, BFT, Linear, Viking, Ghost Controls, and Mighty Mule. That certification coverage matters when your Van Nuys gate stops working on a Sunday afternoon. Our trucks carry parts for the major brands, which means most jobs get done in a single visit. We don’t need to order something, reschedule, and leave your gate hanging open for a week. We fix it correctly the first time, whatever is on the driveway.
Common Gate Installation Problems We See in Van Nuys Homes
Here’s what we encounter most often when we work on gates across Van Nuys, and how we address each one.
- South-facing motor thermal cutoff trips. On consecutive July afternoons, when Van Nuys sits at 108°F and the blacktop is hotter, a standard residential swing gate operator will exceed its thermal limit and shut down. The gate stops working precisely when the homeowner is pulling into the driveway after work. We install operators with higher ambient temperature ratings and thermal-rated capacitors for south- and west-facing installations in Van Nuys.
- Retrofit post footings in cracked 1960s concrete. Most Van Nuys homes had gates added in the 1980s and 1990s, not built at construction. The posts were lag-bolted into concrete driveways or block walls that were never engineered for the cantilevered load of a heavy iron gate. After forty years of Valley heat and winter rain, those footings crack and tilt. We pour new 24-inch-deep footings and correct the hinge post before installing anything.
- Solid infill gates shearing lag bolts during Santa Ana winds. A solid wood or metal privacy gate becomes a sail when the fall Santa Ana winds blow through Van Nuys at 50 to 60 miles per hour. That wind load transfers straight to the lag bolts holding the post to an aging block wall. We bolt through the wall where possible, install longer anchors, and reinforce the post with steel where the block has already started to crumble.
- Track and footing heave after winter rain. When the winter rains soak into the compacted fill under Van Nuys tract-home driveways, the ground swells. Sliding gate tracks shift. Swing gate posts tilt. The gate binds against the latch post and refuses to close. We pour below the fill line and set posts deep enough that the seasonal heave doesn’t move them.
Pricing for Gate Installation in Van Nuys, CA
Here are real numbers for the Van Nuys market, based on what we quote and install every month.
| Gate Type | Typical Installed Cost (Van Nuys) |
|---|---|
| Pedestrian gate (manual) | $1,200-$2,100 |
| Pedestrian gate (automated, keypad) | $1,900-$3,500 |
| Single swing driveway gate (with operator) | $3,200-$6,000 |
| Double swing driveway gate (with operator) | $5,000-$10,000 |
| Sliding driveway gate (with operator) | $6,000-$12,000 |
| Full driveway gate with access control system | $8,000-$14,000+ |
These ranges include gate fabrication or procurement, post installation, operator, safety photocells, and concrete work. Your exact price depends on gate size, material (aluminum, wrought iron, steel, wood), whether we’re replacing posts or starting fresh, and the operator you choose. What you will never see from us is an invoice bigger than the quote. We settle the price before a single bolt is turned. Call (925) 263-6107 for a free written estimate, and ask about the $50 off any repair over $250 if you’re replacing an existing failing gate.
We Also Serve Cities Near Van Nuys
Our Van Nuys crews regularly install gates in Panorama City, Sherman Oaks, Encino, and Reseda. If you’re in one of those neighborhoods, you get the same written 90-Day Done Right Promise and the same live-person phone support. Visit our Van Nuys page for full details on coverage across the Valley, or call (925) 263-6107 to schedule a measure and written estimate.
Serving Van Nuys, CA - Our Local Coverage Area
We’re based in the Van Nuys area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Van Nuys
Your gate’s operator is hitting its thermal cutoff limit, not failing electrically. On consecutive July afternoons when Van Nuys reaches 105 to 112 degrees, the operator’s internal temperature sensor shuts the motor down to prevent damage. South- and west-facing installations on blacktop driveways get the worst of it. The fix is an operator rated for higher ambient temperatures, which we stock and install specifically for Van Nuys homes. Call (925) 263-6107 to have a technician assess your current operator.
Yes, but the frame and posts have to be engineered for wind load, not just weight. A solid infill gate acts like a sail in Santa Ana winds. We weld steel internal frames into wood gates, use heavier-gauge posts, and bolt through wall sections rather than lag-bolting into face brick. The material choice matters less than the anchoring, and we’ve installed wind-rated privacy gates throughout the 91401 ZIP. We’ll spec the reinforcement when we measure, and the quote you get is the price you pay.
Every automatic gate has a manual release, usually a keyed lock or pull handle on the operator housing, that disengages the motor so you can push the gate by hand. On LiftMaster operators, look for a small keyed release on the side of the motor box. Turn the key, pull the release handle, and the gate should swing or slide freely. If the release is stuck, the gate is binding, or you’re not sure where the release is, call (925) 263-6107. A live person answers 24 hours a day, and we’ll talk you through it or send a technician.
In most cases, yes. The post is leaning because its footing has shifted in the saturated fill soil under your driveway, not because the gate itself is damaged. We remove the gate, dig out the old footing, pour a new one at least 24 inches deep, reset the post, and rehang the gate. This is routine work for us in Van Nuys tract homes. The gate comes down, the footing gets rebuilt, and the gate goes back up square and level. You’ll get a written quote before any digging starts.
For most residential driveway gate installations in Van Nuys, the city of Los Angeles requires a permit for any new gate post footings and for the electrical run to the operator. Retrofit replacements on existing footings, where we’re swapping a gate or motor without new concrete work, are typically exempt. We handle the permit paperwork for you as part of the installation, and your quote includes the permit fees. If you want a running start, call (925) 263-6107 and we’ll tell you during the estimate whether your specific project needs one.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Van Nuys and the San Fernando Valley since 1984.