Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Tarzana, CA
If your driveway gate won’t open on a 100-degree Tarzana afternoon, or it starts and stops halfway down the track, you’re not alone. We get these calls from homeowners off Vanalden and Reseda Blvd every week. Ironworks Gate Co. repairs gates, motors, hinges, and access systems throughout Tarzana, and a live person answers our phone 24 hours a day, 7 days a week. Call (925) 263-6107 and tell us what the gate is doing, or not doing. We’ll give you a straight answer, an honest price, and a written 90-Day Done Right Promise on every job.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Tarzana Homeowners Choose Ironworks Gate Co.
We’re not a handyman service that “also does gates.” Gate repair, welding, automation, and access control is all we do. Led by Victor Salinas, our technicians are background-checked, uniformed, and trained on nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When a Tarzana homeowner has a DoorKing operator that’s been on the driveway since the Reagan administration, we know exactly what to look for before we even ring the bell.
Residents in the hills north of Ventura Blvd and homeowners in the flatland tracts south of the Boulevard regularly call us for the same reason: we quote the price before we touch a bolt, and we stand behind the work in writing. A gate is either fixed or it isn’t. We don’t leave until it closes like it should.
Our 90-Day Done Right Promise means if something isn’t right after we leave, we come back and make it right. No paperwork, no arguing, no exceptions.
Gate Repair Services We Offer in Tarzana
Gate Repair
A gate that scrapes, sags, or refuses to close is a problem, not a personality trait. We fix bent frames, snapped hinges, broken track sections, and misaligned limit switches on slide gates and swing gates across Tarzana. Most repairs are done in a single visit.
Learn more about our Gate Repair in Tarzana.
Gate Installation
A new gate has to match the house, handle the slope, and open reliably for decades. We install steel, aluminum, and ornamental iron gates suited to Tarzana’s specific neighborhoods, from modest ranch-style frontages to long hillside driveway estates.
Learn more about our Gate Installation in Tarzana.
Gate Motor & Opener
If the operator hums but the gate doesn’t move, or the arm swings free while the gate stays put, the motor or its control board is usually the culprit. We service and replace operators on all nine major brands, including Viking and Ghost Controls units common on Tarzana properties.
Learn more about our Gate Motor & Opener in Tarzana.
Gate Access Control
Keypads, intercoms, vehicle loop detectors, and telephone entry systems have to talk to the gate operator correctly, especially on Tarzana’s hillside estates where the gate sits a hundred feet from the house. We wire, program, and troubleshoot the whole chain, not just one piece of it.
Gate Parts & Welding
Some repairs need a torch, not a wrench. Cracked ornamental iron, snapped post welds, and rusted steel frames on older Tarzana gates often require in-field welding. We carry common parts on the truck and can fabricate brackets, reinforcement plates, or replacement sections when needed.
Neighborhoods We Serve in Tarzana
Our crews know Tarzana’s terrain: the steep driveways off Mulholland, the gated estates along Ventura Blvd’s north side, and the 1950s-70s ranch homes south of the Boulevard near the 91356 and 91335 zip codes. Typical response time anywhere in Tarzana is same-day for most repair calls.
- Hillside estates north of Ventura Blvd
- Flatland tracts south of Ventura Blvd
- Areas around Vanalden Ave and Wilbur Ave
- Properties near Reseda Blvd and Tampa Ave corridors
- Communities flanking the 101 Freeway
Why Tarzana’s Climate & Housing Affect Gate Repair
Tarzana sits deep in the San Fernando Valley heat trap. Summer highs routinely top 105°F, and that does two things to a gate system: it degrades wiring insulation faster than coastal communities 15 miles west ever see, and it stresses control boards and capacitors to the point of failure. We replace heat-fatigued capacitors on Viking and DoorKing boards regularly in Tarzana, often on hillside estates where the operator has been bolted to the same wall since the 1980s or 1990s Valley real estate boom.
Then there are the Santa Ana winds. When they funnel through the Valley gaps, they bend lighter aluminum gate frames, snap hinge welds, and shove debris into slide-gate tracks. Homeowners on the properties north of Ventura Blvd, climbing toward the Santa Monica Mountains foothills, feel this most. A gate that worked fine in October can be hanging crooked by November. We keep weld repairs and track clearing at the top of our Tarzana service list every fall.
Pricing for Gate Repair in Tarzana
Most Tarzana gate repairs fall into predictable ranges, and we quote the exact price before any work starts. No surprises on the bill, ever.
- Limit switch adjustment or track cleaning: $95-$185
- Hinge replacement or weld repair: $150-$350
- Operator capacitor or control board repair: $180-$400
- Full operator replacement (parts and labor): $800-$2,500 depending on brand and gate weight
- Complete gate installation: $2,500-$9,000+ depending on material and automation
Every quote is a fixed price, agreed before we start. Ask about our $50 off any repair over $250, our $89 seasonal tune-up, or the permanent 5% senior and veteran discount.
Service Area - Cities Near Tarzana
Ironworks Gate Co. serves Tarzana and the surrounding Valley communities. If you’re in Encino, Reseda, Winnetka, or Canoga Park, we’ll come to you with the same same-day response and flat-rate pricing.
Serving Tarzana, CA - Our Local Coverage Area
We’re based in the Tarzana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Tarzana
Most Tarzana gate repairs run between $95 and $400, depending on whether the issue is a mechanical adjustment, a weld, or an electrical component. Full operator replacement starts around $800. Call (925) 263-6107 for a free estimate with an exact number, quoted before any work begins.
In most cases, yes. We keep same-day appointments open for gate repair calls in Tarzana, and a live person answers our phone 24/7. If your gate is stuck open or stuck closed, call (925) 263-6107 and we’ll tell you when we can be there.
Yes, regularly. Gravity is hardest on gates north of Ventura Blvd, where uncalibrated swing operators drift or slam under the gate’s own weight. We torque and calibrate every operator we touch, and we check anti-drift settings on every hillside call.
Yes. Our technicians are trained and equipped on all three, plus LiftMaster, FAAC, BFT, Linear, Ghost Controls, and Mighty Mule. Whatever operator is on your Tarzana driveway, we can diagnose and repair it correctly on the first visit.
It’s our written guarantee: if the repair we did isn’t right within 90 days, we come back and fix it. No cost, no argument, no hoops. That applies to every gate repair, installation, motor replacement, and access control job we complete in Tarzana.
If your gate is giving you trouble in Tarzana, call Ironworks Gate Co. at (925) 263-6107. A live person will answer, ask what the gate’s doing, and give you an honest take on what it’ll take to fix. You’ll get a free estimate, a fixed price before we start, and the 90-Day Done Right Promise in writing when we finish. That’s the deal.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Tarzana and the San Fernando Valley.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Tarzana Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and put a surge protector on the line so hopefully it does not happen again."
- Layla Haddad"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."
- Jamal Dawson"The hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a new gate, which two other companies had pushed for."
- Megan Whitaker